Description
PORTABLE SELF-CONTAINED EYEWASH
15 Gallon Portable Eyewash and Drench Hose Unit features an easy to transport stainless steel pressurized tank with built in handles, air intake fitting, pressure gauge and a pressure relief valve
Firstly The – TANK
15 gallon stainless steel pressurized tank. Tank has built-in carrying handles, Schrader air intake valve, pressure gauge and pressure relief valve. Tank has approximately 10 gallons (37.9 liters) usable capacity.
Material : SUS304# stainless
Dimension : Ø350 X 750（H）mm
Volume : 60 Liter（15Gallons）， Supply for above 15 minutes flushing
Self-Valve : Brass relief valve automatically opens at 120 psi to prevent vessel over-pressurization
Air Gauge : Air gauge with easy to read graphic face to simplify tank pressure monitoring
Level Indicator : Level indicator at the back of tank, you can see the water level from the red float
Wheel : It is easy to move the equipment, just with the handle at the back, wheel is turn on to everywhere
Pressurization Port : It is easy to do the pressurization work by compressor or car equipment.
Secondly The- EQUIPMENT
Self-contained eyewash and/or drench hose units are ideal where a continuous supply of potable water is not available. These units may be used in low traffic areas, where installation of plumbed equipment is not cost effective. Fifteen gallon units provide approximately 10 usable gallons (37.9 liters) of water for effective rinsing of the eyes, face or body. Note that, under ANSI Z358.1-2014, drench hose units supplement but do not replace other types of emergency equipment.
Dimension : 350(W) X 600(D) X 1200(H) mm
Eyewash height : 1140 mm
Eyewash tube : 1/2″ SUS304# stainless
Spray head bore : 3/8″ SUS304# stainless）
Spray head : Nylon material Φ50㎜ x 44㎜ (H) ，Include two kind filter with yellow plastic floating cover.
Action : Hand push plate
Actuator : 1/2″ brass valve
Thirdly The- WASH HOSE
Single GS-Plus spray head with “flip top” dust cover, internal flow control and filter. Chrome plated brass squeeze valve with stainless steel lever handle and 6 ft.
reinforced PVC hose.
Material : Brass body with PVDF seal for avoiding leaking
Handle : PVC material
Hose : 1/4″ blue PU hose tube
Action : Push the handle to open water, fixed clip makes it continuing working automatically
Latly The- OPERATION for PORTABLE SELF-CONTAINED EYEWASH
To operate unit, fill with clean potable water and add bacteriostatic additive (supplied with unit). Also additive protects against growth of bacteria, fungus, algae and
acanthamoeba inside unit. After filling with water, pressurize unit to 80 PSI air pressure. If necessary, adjust pressure regulator to achieve maximum flow for fifteen minutes. Unit should be inspected regularly and water in unit should be changed at least once every six months. Filling instructions included.
Finally the Most Important – Compliance:
Manufacturing party
Esnico eyewash series comply following with standard of ANSI Z358.1-2014, and requirements of OSHA.
Lastly : The Product Code
SKU: PORTABLE SELF-CONTAINED EYEWASH
Important note- Stock Unit, However, it is subject to prior sales.
Finally, we are available 24hour – Contact us now
