Emergency Eyewash and Shower Room

Type: Combination Units
Standard: ANSI Z358.1-2014, OSHA 29, EN15154, AS4775-2007
Material: Stainless Steel 304
Eyewash Flow Rate: ≥11.4L/min
Shower Flow Rate: ≥75.7L/min
Flusing Time: ≥15 min
Inlet size: 1-1/4”
Inlet size: 1-1/4”
Minimum Ambient Temperature: 5°C/41°F
Maximum Ambient Temperature: 35°C/95°F

SKU: H-ESW070SS Categories: ,

Description

Emergency Eyewash and Shower Room

The shower room is made of stainless steel with folded door.

It can be equipped with standard, anti-freezing or cable heated eyewash inside.

Emergency shower room is a room installed with shower and eyewash.

It avoids secondary contamination caused by waste water flowing to working areas.

It mainly used in electronical factory and pharmaceutical plant.

Introduction

Multi-Functional Compound Shower Room & Eye Washer
As new generation compound shower room and eye washer, also, it’s have multi-functional besides basic eye wash & shower functions which including adding water tank on the top of the room. Set water heater system & water cooling system& add the alarm light on the top.
Similarly, in the event of chemical or poison spill accident, this equipment can minimize the damage and harm to the user by delivers water to rinse contaminants from user’s eyes, face and body.
For instance, as compound emergency aid equipment, most importantly,  it manufactured in according with ANSI Z358.1-2004 Standard which including sets code for length, height, flow volume and spray area etc. lastly Ergonomically designed with two spray heads.
Height and angel of the heads are based on human face proportion to provide the most comfortable using feels.

Detail Information In this paragraph

(2)Pipe &Pull Rod: Good quality 304 stainless steel tube content with more than 8% nickel and wall thickness 3.0mm. B
(3)Spray head: One time stamping molding use seamless 304 stainless steel and combined with inner welding
(4)Flag handle: Bright Yellow. Luminous. Easy to recognize even in the dark.
(5)Nozzle: Made by 3 layers stainless steel net and layer PP net which ensure the equipment have a clean water source.
(6)There are reinforcement holding frame on three sides of the wall. Each side have five 4 * 1cm curved hole which consistent with the principle of aesthetics and practical to make the inner wall more beautiful and useful.
(7)The floor assembled by 2 removable punch plate which have total 234 round holes. Importantly With scientific designed, 10mm diameter holes that perfectly ensure the water can be drain in time and prevent other things drop in.
(8)30-degree angel of the bottom plate will drain the water more efficient.
(9)Windows on the Pvc sliding door not only allow people easily observe the internal situation but also make a good protection of use’s privacy.
(10)Lastly, Customize is available.

SKU: Model: H-ESW070SS

Finally, Our Hotline open 24hours – Please do Contact Us 

error: Content is protected !!